The main introduction of environmental protection spray booth
Are environmentally friendly spray booths more and more popular with you? The answer is yes, the environmentally friendly spray booth is a new type of spray booth that is becoming more and more popular.
What is an environmentally friendly spray booth
The environmental protection spray booth, as the name implies, is that the traditional spray painting is to spray paint on the appliances (cars, furniture, etc.) with a nozzle in the open air, but this method will reduce the quality of the paint for large appliances.
An eco-friendly spray booth is a spray booth designed to reduce harmful emissions released into the atmosphere.
Traditional spray booths rely on ventilation systems to remove fumes and overspray from the spray area. However, these ventilation systems also release harmful chemicals and particulates into the air.
Eco-friendly paint booths use a variety of different technologies to reduce emissions, including filtration systems, recirculation systems, and water-based paint systems.
Environmental protection spray booth cleaning method
The cleaning of the environmental protection spray booth should be carried out according to the following steps:
1. Use a high-pressure air gun to remove the dust on the surface of the filter element;
2. Clean the filter element with water, and then dry it in a ventilated place;
3. After cleaning the filter element, open all doors and windows for ventilation;
4. Use a high-pressure air gun to remove the dust on the surface of the workpiece;
5. Wipe the paint or other stains left on the workpiece with a damp cloth or sponge;
6. The workpiece should be dried in a ventilated place.
Environmental protection spray booth precautions
1. Before spraying, it is necessary to check whether the air pressure of spraying is normal, and at the same time ensure that the filter system is clean;
2. Check the air compressor and oil-water dust separator to keep the paint spraying hose clean.
3. Spray guns, spray hoses and paint cans should be stored in a clean place;
4. Except for dust removal with a blow gun and a sticky dust cloth, all other pre-spraying processes should be completed outside the paint booth;
5. Only spraying and baking can be carried out in the paint baking room, and the door of the paint baking room can only be opened when the vehicle enters and exits. When opening the door, the air circulation system during spraying must be activated to generate positive pressure to ensure that the dust outside the room cannot be enter the room;
6. The designated spraying clothes and safety protection equipment must be worn to enter the paint booth for operation; 7. During the baking operation, the flammable items in the paint booth must be taken out of the room;
8. Non-essential personnel are not allowed to enter the paint booth.
There are many combinations of spray booth products. The non-standard specifications allow various manufacturers to choose their own environmental protection equipment.
