Automotive Prep Station

Item No.: PC-PS300C
1. Automotive Prep Station
2. Work area made for vehicle preparation and painting
3. Full down plenum for better air cycle
4. Multiple filtration system
5. Air capacity: 15400m3/h
6. G10 diesel for painting better performace in cold area
Description
​Model No. PC-PS300C ​
Outside size L7550 x W3550 x H3150 (mm)
Inside size L6300 x W3450 x H2700 (mm)
Plenum size L6400 x W3550 x H450 (mm)
Basement 300mm height, all grills
Ramp 2pcs, each size L1750 x W600 (mm)
Ceiling light 4pcs x 8units, totally32pcs, 16w/pcs, total power 0.5kw
Tube Led
Light box glass Tempered
Air ventilation system
1. 1pcs 5.5kw air intake centrifugal fan, air volume 15400m3/h
2. 1pcs 4kw air exhaust centrifugal fan, air volume 14000m3/h
Cabin structure
1. Air intake plenum is made of cold-rolled sheets
2. Ceilling boards are made of the galvanized steel sheets
3. PVC manual curtains around the sides and slipping on the aluminum alloy rails
4. 50mm EPS panels at the back wall
Heating system
1. 1pcs Italy Riello diesel G10 burner, max heating capacity 100000kcal/h
2. 1.2mm thickness SUS304 stainless steel, argon are welding, 1-layer heat exchanging sheets
Generator structure rear exhaust, square tube frame, powder coating finish
Filtration system primary filter, ceiling filter, fiber glass filter
Control system controls fan, electric damper, burner and illumination only
Installation way sling hoist, square tube support
Voltage require 380V, 3P, 50HZ
Total Power 10kw
Guangzhou Paintcolor Mechanical Equipment Co., Ltd© All Rights Reserved.    POWERED BY UEESHOP