Down draft booth for large equipment vehicle refinishing Paintcolor paint booths collision repair paint chamber
Spray booth paint booth:
Model: PC-DS2
Features:
1: 2*3KW centrifugal fan for air inlet, 1*5.5KW centrifugal fan for air exhaust. With electrical damper.
2: With LED ceiling lighting and bottom lighting.
3: Italy Riello diesel burner G10.
4: Full down draft booth with metal basement 300mm.2 lines of grids.
5: 50mm thick EPS wall panels and galvanized steel sheet for roof panels.
Specification:
Dimensions:
1): Outside dimension: 7000×5200×3400mm (L×W×H);
2): Inside dimension: 6900×3900×2650mm (L×W×H)
3): Front door dimension: 3000×2600mm (W×H);
4): Working door dimension: 600×1800mm (W×H)
Cabin System:
1): Wall panel: 50mm thickness flame-resistant and heat-preserving EPS panel; Wallboard edges with iron cladding cover.
2): With metal framed main door. Door panels are with double sided 0.8mm coating steel plate. With EPS staff inside;
3): Basement: height is 300mm;made by galvanized steel sheet bending and welding, 3 rows embossed plates and 2 rows grilles made by 30*5 belt steel iron. Wheel weight 500KGS.
4): Roof panel: galvanized steel sheet.
5): Ramp: 2 partial ramps, single size is L1800 x W600 x H300 (mm), embossed plate structure.
Lighting System:
1): Ceiling Lights: 8Groupsx3Pcs=24Pcsx16W; LED lamp.
2): Bottom lights: 8Groupsx2Pcs=16Pcsx16W; LED lamp.
3): Illuminance: ≥800Lux.
Generator Structure:
1): Frame made by Square pipe welding , cover made by coated galvanized sheet, electrical damper.
Air Purification System:
1): Pre-filters effectively capture dust particles larger than 10 um
2): Ceiling filters efficiently capture dust particles larger than 4 um with a capturing rate of over 98%
3): Floor filter is Eu2 grade fiberglass filter below the grids to filter the excess paint mist produced during the painting process
4): Exhaust filter: double layers of fiberglass filter to deal with paint mist plus active carbon filter to absorb paint odor.
China Spray booth paint booth:
Air Circulation System:
1): Air intake system:2 sets of 3KW centrifugal fans, Total Air capacity: 20000m3/h, Pressure: 760Pa, Rolling speed:1440rpm,Power: 3kw/set, Quantity:2 sets
2): Air exhaust system:1 set of 5.5KW centrifugal fan, Total Air capacity: 15000m3/h, Pressure: 760Pa, Rolling speed:1440rpm,Power: 5.5kw/set, Quantity:1 set.
Heat System:
1): Heat exchanger: made by stainless steel, argon arc welding.
2): Italy Riello G10 diesel burner, max heating capacity: 100000kcal/h.Fuel consumption is 4-5 kgs/vehicle. Max baking temperature:60 ℃.
Control System:
1): Function button: paint, bake, lighting, temperature control, time setting, etc.
2): Protective device: Emergency stop switch, current leakage protection.
Total Power:13KW.
Voltage Require: 380V,50HZ,3P.
