Side Downdraft Paint Booths Drive-through Spray Booth Downdraft Paint Booths Paintcolor Heated Paint Booths Air Flow Booth For Body Shop Business Spraybooth for Collision Repair Panel beating Spray Oven
1: 2*4KW centrifugal fans for air inlet, 1*5.5KW centrifugal fan for air exhaust.
2: With LED ceiling lighting and bottom lighting.
3: Italy Riello diesel burner G20.
4: Full down draft booth with metal basement 300mm
5: 50mm thick EPS wall panels and galvanized steel sheet for roof panels
1): Outside dimension: 7000×5560×3430mm (L×W×H); 2): Inside dimension: 6900×4000×2650mm (L×W×H)
3): Front door dimension: 3000×2600mm (W×H); 4): Working door dimension: 800×2000mm (W×H)
1): Wall panel: 50mm thickness flame-resistant and heat-preserving EPS panel; 0.426mm thickness double-face colored steel sheet
2): Roof panel: galvanized steel sheet
3): Basement height is300mm; galvanized steel sheet frame and square steel duct support beam assembling, 3 rows embossed plates and 2 rows grilles
4): Ramp: 2 partial ramps, single size is W600 x L2000 (mm), embossed plate structure
1): Ceiling Lights:8 Groupsx4Pcs=32Pcsx16W;LED lamp, Side lights:8 Groupsx2Pcs=16Pcsx16W;LED lamp
2): Illuminance: ≥800Lux, Glass: tempered, Sealing: omniseal
1): Upper damper; side upper intake air; rear upward exhaust
2): Quadrate steel frame, powder coated
3): Galvanized steel sheet mask board, powder coated, with the acoustic plate and heat preservation plate
Air Purification System:
Primary filter, High efficiency filter (ceiling filter), Floor Paint stop filter (fiberglass), Active carbon particle filter, Exhaust filter.
Air Circulation System:
1): Air speed: 0.24m/s, Air recycling times: 270times/h
2): Intake fan: 2 sets of 4 KW centrifugal fans, capacity: 12500m3/h/set, Pressure: 820Pa,Rolling speed: 900rpm,with CE certified motor; Quantity: 2 sets
3): Exhaust fan: 1 set of 5.5 KW centrifugal fan, capacity: 15500m3/h/set, Pressure: 825 Pa, Rolling speed: 900rpm,with CE certified motor; Quantity: 1 set
4): Air exhaust pipe:4m straight from the cabin and 1x90° elbow; Intake duct supply: Fresh air comes in directly
5): With 20N electric actuator, damper adjustment to exchange from painting to baking;
1): Heat exchanger: stainless steel SUS304, argon arc welding, 2-layer heat exchanging sheets
2): Italy Riello G20 diesel burner, max heating capacity: 180000kcal/h
3): Oil consumption 4~6L/set; Heating time 5~7minutes (from 20° to 60°)
4): Chimney: 4m from the cabin and 1x90° elbow, galvanized sheet made
1): Function button: paint, rising temperature paint, bake, temperature setting, time setting, lighting, hour meter, fan failure indicator light, burner failure indicator light
2): Protective device: Emergency stop switch, breakdown alarm, thermal protector
3): Start: direct, Electric wire: 3 phases 5 lines
Our Product Categories