Full down-draft automotive paint spray booth Car painting booth with exhaust filters cost effective painting chamber spray painting booth
Full down-draft automotive paint spray booth:
Model: PC-AS2
Features:
1. Fully down-draft paint and bake booth
2. 2x4kw air intake fan
3. SUS304 heat exchanger, 2-layer heat exchanging sheets
4. Italy Reillo diesel burner G20
5. LED lighting tube
6. Generator powder coating finish
Automotive paint spray booth:
Specifications:
Size:
1): Outside dimension:7000×5560×3430mm (L×W×H); 2): Inside dimension: 6900×4000×2650mm (L×W×H)
3): Front door dimension: 3000×2600mm (W×H); 4): Working door dimension: 800×2000mm (W×H)
Cabin System:
1): Wall panel: 50mm thickness flame-resistant and heat-preserving EPS panel; 0.426mm thickness double-face colored steel sheet.
2): Roof panel: galvanized steel sheet.
3): Basement: height is 300mm; galvanized steel sheet frame and square steel duct support beam assembling, 3 rows embossed plates and 2 rows grilles.
4): Ramp: 2 partial ramps, single size is W600 x L2000 (mm), embossed plate structure.
Lighting System:
1): Ceiling Lights: 8Groupsx4Pcs=32Pcs x16W; LED lamp.
2): Illuminance: ≥600Lux.
3): Glass: tempered.
4): Sealing: omniseal.
Generator Structure:
1): Upper damper; side upper intake air; rear upward exhaust.
2): Quadrate steel frame, powder coated finish.
3): Galvanized steel sheet mask board, powder coated finish, with the acoustic plate and heat preservation plate.
Air Purification System:
Primary filter, High efficiency filter (ceiling filter), Floor Paint stop filter (fiber glass).
Air Circulation System:
1): Air speed: 0.25m/s m/s, Air recycling times: 280times/h.
2): Intake fan: 2 sets of 4 KW centrifugal fans, capacity: 12500m3/h/set, Pressure: 822Pa,Rolling speed: 900rpm,with CE certified motor; Quantity: 2 sets.
3): Air exhaust pipe:4m straight from the cabin and 1x90° elbow; Intake duct supply: Fresh air comes in directly.
4): With 10N electric actuator, damper adjustment to exchange from painting to baking;
Heat System:
1): Heat exchanger made by stainless steel SUS304, argon arc welding, 2-layer heat exchanging sheets .
2): Italy Riello G20 diesel burner, max heating capacity: 180000kcal/h.
3): Oil consumption 4~6L/set; Heating time 5~7minutes (from 20° to 60°).
4): Chimney: 4m from the cabin and 1x90° elbow, galvanized sheet made.
Control System:
1): Function button: paint, rising temperature paint, bake, temperature setting, time setting, lighting, hour meter, fan failure indicator light, burner failure indicator light.
2): Protective device: Emergency stop switch, breakdown alarm, thermal protector.
3): Start: direct.
4): Electric wire: 3 phases 5 lines.
Total Power: 10KW.
Voltage Require: 380V, 3P, 50Hz.
