PC-AS4 Smooth air circulation car paint booth hot sales spray booth model Paint drying booths

Car paint booth | hot sales spray booth | spray booth



High-Performance Automotive Spray Booths & Prep Environments for Auto Body Shop Automotive Paint Booths Woodworking Spray Booths Custom Paint Booth Paintcolor Paint Booth Paint Cabin Paint Spray Chamber


About hot sales spray booth:

Model: PC-AS4


1: 2*4KW centrifugal fans for air inlet, 1*7.5KW centrifugal fan for air exhaust.

2: With LED ceiling lighting and bottom lighting.

3: Italy Riello diesel burner G20.

4: Full down draft booth with metal basement 300mm

5: 50mm thick EPS wall panels and galvanized steel sheet for roof panels



Car paint booth | hot sales spray booth | spray booth



Hot sales spray booth:



1): Outside dimension: 7000×5560×3430mm (L×W×H);   2): Inside dimension: 6900×4000×2650mm (L×W×H)

3):  Front door dimension: 3000×2600mm (W×H);     4): Working door dimension: 800×2000mm (W×H)

Cabin System:

1): Wall panel: 50mm thickness flame-resistant and heat-preserving EPS panel; 0.426mm thickness double-face colored steel sheet

2): Roof panel: galvanized steel sheet

3): Basement: height is 300mm; galvanized steel sheet frame and square steel duct support beam assembling, 3 rows embossed plates and 2 rows grilles

4): Ramp: 3 partial ramps, single size is W600 x L2000 (mm), embossed plate structure

Lighting System:

1): Ceiling Lights: 8Groupsx4Pcs=32Pcsx16W; LED lamp, Side lights: 8Groupsx2Pcs=16Pcsx16W; LED lamp

2): Illuminance: ≥800Lux, Glass: tempered, Sealing:omniseal


Generator Structure:

1): Upper damper; side upper intake air; rear upward exhaust

2): Quadrate steel frame, powder coated

3): Galvanized steel sheet mask board, powder coated finish, with the acoustic plate and heat preservation plate.

Air Purification System:

Primary filter, High efficiency filter (ceiling filter), Floor Paint stop filter (fiberglass), Active carbon particle filter, Exhaust filter.

Air Circulation System:

1): Air speed: 0.25m/s, Air recycling times: 280times/h

2): Intake fan: 2 sets of 4 KW centrifugal fans, capacity: 12500m3/h/set, Pressure: 822Pa,Rolling speed: 900rpm,with CE certified motor; Quantity: 2 sets

3): Exhaust fan: 1 set of 7.5 KW centrifugal fan, capacity: 21000m3/h/set, Pressure: 783 Pa, Rolling speed: 900rpm,with CE certified motor; Quantity: 1 set

4): Air exhaust pipe:4m straight from the cabin and 1x90° elbow; Intake duct supply: Fresh air comes in directly

5): With 20N electric actuator, damper adjustment to exchange from painting to baking;


Heat System:

1): Heat exchanger: stainlesssteelSUS304, argon arc welding, 2-layer heat exchanging sheets

2): Italy Riello G20 diesel burner, max heating capacity: 180000kcal/h

3): Oil consumption 4~6L/set; Heating time 5~7minutes (from 20° to 60°)

4): Chimney: 4m from the cabin and 1x90° elbow, galvanized sheet made

Control System:

1): Function button: paint, rising temperature paint, bake, temperature setting, time setting, lighting, hour meter, fan failure indicator light, burner failure indicator light

2): Protective device: Emergency stop switch, breakdown alarm, thermal protector

3): Start: direct, Electric wire: 3 phases 5 lines

Total Power:17KW

Voltage Require: 380V,3P,50Hz




  • wdh-site
    No. 280 Liangtian Road, Baiyun District, Guangzhou City, China 528200
  • wdh-site
  • wdh-site
    Tel:+(86) 183 1681 9815

Guangzhou Paintcolor Mechanical Equipment Co., Ltd

    wdh-site wdh-site


Thank You!

Your information has been sent to us, we will reply you shortly


No success, please try again!

Try Again